This error indicates a functional issue with the dishwasher's temperature sensor.
The temperature sensor may be malfunctioning or not properly detecting the water temperature.
With the dishwasher empty, add detergent and run a cycle. If the problem persists, contact an authorized Samsung service center.
This error signifies that there is an over-accumulation of water within the dishwasher.
The water level within the dishwasher has exceeded the normal levels due to a malfunction.
Close the water supply valve, switch off the dishwasher's circuit breaker, and contact an authorized Samsung service center.
Indicates that there is a leakage within the dishwasher.
The dishwasher has detected a leak, which could be due to a faulty door seal or internal hose.
Turn off the dishwasher and attempt to start it again. If the error persists, contact a service center.
This error is triggered by a malfunction with the control panel buttons.
The buttons on the control panel may be stuck or not responding correctly.
Turn off the dishwasher and try pressing the buttons again. If the issue continues, seek professional assistance.
Indicates that the rinse aid dispenser is running low or empty.
The rinse aid level is insufficient for the dishwasher's operation.
Refill the rinse aid agent dispenser to ensure optimal drying performance.
The Child Lock feature is activated to prevent unintended use.
The Child Lock function is enabled, locking the control panel buttons.
To unlock, hold the Sanitize button down for three seconds. If the power is off, first press the Power button, then hold Sanitize.
This light indicates that the dishwasher is currently in the wash or rinse phase of a cycle.
The dishwasher is actively cleaning the dishes.
No action is required as this is a normal operational indicator.
Signals that the dishwasher is in the drying phase of a cycle.
The dishwasher is drying the dishes post-wash.
No action is necessary; the light will turn off once drying is complete.
Illuminates when the dishwasher has completed the wash cycle successfully.
The cleaning cycle is finished, and the dishes are ready.
The light will automatically turn off after 10 minutes or when the door is opened.
This function allows you to cancel a running cycle and drain the dishwasher.
It is used when you need to halt the current operation and remove water.
Press the Heavy and Quick + buttons simultaneously for three seconds to activate.